200Mm Towel Rails

right, back to my bathroom again,

and the wife has decided she wants a towel rail in a place that Im findinding issues to even get tiled.!

I have a gap of about 300mm max, so Im thinking 200mm towel rail,

please dont link me to that 1000£ bow shaped one!

I know its gonna be more than the normal 50£ max I like to pay, the mrs is deffo paying this one!!!!!!!

£100 is the best Ive seen yet, not too fussy, I would prefer chrome, but white will be fine if the numbers are right.

Wow, 200mm, that's very narrow. At that sort of width you normally have vertical elements................but plenty of 300mm wide ones a about sum £100. I just Googled "towel radiator x300mm".

http://www.google.co...iw=1280&bih=863

A couple of sub £100 300mm wide ones here: http://www.smrbathro...Towel-Rail.html

What about a 200mm dia spiral one, might let u get nearer the wall where you want the narrowness and "only" £99,

http://www.bestheati...mm-x-200mm.html

Or learn to TIG weld and make your own, designed to fit the space..................or get a bunch of chrome push fit fittings and make yer own!

Can you get a towel on 200mm width !!!! :yellow card

Steve3948 said:

Can you get a towel on 200mm width !!!! :yellow card

Click to expand...

Believe it's called "a flannel"

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

steptoe said:

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

Click to expand...

Corner one?

http://www.designer-...el-warmers.html

This one's nice IMO and VERY slim, pricey I bet:

http://www.kudox.com/Products/Designer_Towel_Warmers/5060235344862_HeatBar_Twin_Hyd/5060235344862_heatbar_twin_hydronic_towel_warmer_250mm_x_1800mm_.html

steptoe said:

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

Click to expand...

Not this one http://www.bestheating.com/chrome-small-coil-10-ring-heated-towel-rail-540mm-x-200mm.html

it's out of stock!!!

Don't know what you're struggling with, what's wrong with this.

http://item.mobileweb.ebay.co.uk/viewitem?itemId=180950446943

Sharpend said:

Don't know what you're struggling with, what's wrong with this.

http://item.mobilewe...Id=180950446943

Click to expand...

That's a toilet roll holder, hahaha :slap is it 15mm feed with concealed valves

Sorry have I misunderstood? Didn't see anything about heated!!

well the way I plumb it probably wont be,

anyway, I just flush the toilet, its plumbed into the hot anyway.

Can't you just get bit flash with a length of 20mm galv and a Hilmor? However it turns out tell her it's "designer"!

bit like the clothes rail I made her.!!!!!

funnily enough, if I get really stuck I'll get my mate to solder one up out of copper and get it dipped or powder coated, thats the last resort though.

steptoe said:

bit like the clothes rail I made her.!!!!!

funnily enough, if I get really stuck I'll get my mate to solder one up out of copper and get it dipped or powder coated, thats the last resort though.

Click to expand...

It's a curtain rail in my house! You could use chromed copper pipe and chromed push fit tees and elbows - they're almost as slim as Yorkshires..........but the cost would be astronomic!

http://www.homeofchrome.co.uk/inc/searchresults?s=22mm%20pushfit%20chromed&ss=22mm%20pushfit%20chromed&n=873450

how about 185mm towel warmer.................electrikery one though.

http://www.kudox.com/Products/Electric_Towel_Warmers/5060235344855_HeatBar_Single_E/5060235344855_heatbar_single_electric_towel_warmer_185mm_x_1800m.html

M107 said:

how about 185mm towel warmer.................electrikery one though.

http://www.kudox.com...mm_x_1800m.html

Click to expand...

Who did'nt read post 6 then. :red card

:coat