Julie 1500 led ip65 4200 840 E3 with emergency connection

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

[email protected]

New member
Joined
Jul 19, 2021
Messages
1
Reaction score
0
Hi there,

I got a ceiling led light but due to the actual wiring (sensor and emergency battery)not able to connect. 

This will be a simple garage light so don’t need sensor and emergency battery and need to insulate them and any help is appreciated. 
please see pictures attached and let me know how I should do to connect it straight to switch. 

https://share.icloud.com/photos/0FRnfctNHAYZ0dEjAF2tocqtA

thanks a lot. 
 

 
Can't see where the sensor is connected, 

Battery is across 1 & 2 , so you could try linking those terminals out in case it's non maintained, 

No warranty as the pics are inconclusive. 

 
Assuming this is a Maintained fitting you will have four terminals Neutral, Earth, Live and Live. The way the two Lives are identified will vary between manufacturers one however is "permanent live" which if you are not utilising the emergency aspect needs no connection. Your live needs to go to the one marked by one of these L, L1, SwitchLive, it is probably one of these and the fitting should work as a standard luminare. Not sure what you mean by the sensor.

 
Last edited by a moderator:

Latest posts

Top