Recent content by Fleeting

If you need any sort of guide you shouldn't be doing it.

Depends how many KW the heaters are, up to 2KW then 10A is fine.

How many KW are the heaters 10A is probably fine.

Probably wasting your time. The chances of it being free from conductive parts of the electrical installation is probably zero especially if the steelwork is the main structure as opposed to a small "floating" part.

It is a functional switch therefore it should be capable of that function. Small gentle tap with a smallish hammer normally resolves it then remove the flaked paint. 5.18 of the Inspection Schedule, Condition of accessories............. is relevant.

Don't worry about it I don't.

It is annoying I got one wrong on my 2391 but they couldn't tell me which one just that one was wrong.

Not sure how any of this helps the OP.

Be interesting to see the inside.

If that is the correct lid then an RCD has been removed. Edit, just checked the Part No and it should be dual RCD so that has been doctored.

You just need an RCBO (combined RCD and MCB) unless the spare ways are already RCD protected in which case just an MCB.

Suitable is as you say and the pic to see the nature of any RCD protection and whether protective devices are still available.

No provided it is suitable it is fine. Can you show a pic?

EV been around longer than ICE anyway but didn't catch on the fun was elsewhere.

It's engine, the fuel, the exhaust, the way you have to manipulate it all to get performance.