Try unplugging the data logger then plug back in. reset using the tiny reset button , before hitting reset have your phone ready to search for the data logger Wi-Fi signal
Locked to prevent hi-jacking (again)
We’ve gone to a new broadband supplier and as I have a lot of smart gadgets I’ve added a mesh router and given the mesh the same username and password as my old router. switched off the 5.0g on the mesh and everything continues to connect as before
When my Growatt 6Kw system was installed it had a 16amp that kept tripping, the Solar Co sent someone out who changed it for a 32a. Different electrician, and now a year later still no more tripping
Or as in my case when we first had broadband fitted all extensions had to be disconnected as they reduced the the minimum db that broadband would work at
This link was posted by someone else
https://www.tradesparky.com/solarsparky/batteries/growatt/growatt-65kwh-cable-2-way-2cat-for-2-batteries
Or another idea that was suggested to me by an electrician was to connect your batteries to a Henley Block and then to the inverter, so you could use your...
I’m planning on connecting my Growatt sph6000 ups to my downstairs ring main through a manual transfer switch. Then in the event of a power cut I’ll be able to run a few essential appliances
You can’t integrate the Easee one with the Eddi, I have a Easee one fitted and it is not solar compatible, so I installed a zappi. I contacted Easee and they may have a Solar system later this year but they don’t know when it will be available in the uk
Ye been through all that, the inverter will randomly import/export 0.02-0.03Kw. The settings you’re going to need are best done from a pc you get a better idea of what to change if you’re planning on charging your batteries at a specific time. Yes I have the same batteries they’ve done as asked...