Recent content by btwo5

anyone got any test papers or mock questions i might find on the 2330 level 3 303 fault finding exam, ive got the exam monday and would like to do some practice questions

i had to faults with wrong polarity so i made them a 1, should a high r2 reading be a 2 then ?

thanks very much, only fault i wasnt to sure on, got the write up and the 16questions this monday how many years/months should a storage unit turned into a workshop be tested ?

ive found the fault, it was a high cpc reading, earth at board to all earth points, the cooker had 26.6 ohms i just need to write up the method to rectify it, would this work take of the cooker switch cover check to see if the cpc is loose if not re-tighten the connection re-fit the cover and...

hi, im looking for an apprenticeship or work alongside and experienced electrician in the birmingham area, im 19 years old and ive passed level 2 2330, im about to finish my level 3 2330 i've got my final exam this monday on fault findings and rectification. ive got a cv if you'd like me to send it

is that all i should be writing for the rectification process remove the cover off the cooker switch visually check to see if any connections are loose, if there not loose tighted the connections up and place the switch cover back on and retest the cooker r2 ? would that work for the...

i done my exam, pretty simple only problem i had is about the rectification method to fix a 26.6 ohm reading on r2 to a cooker switch, any chance you could tell me how id go about fixing that and the PIR code for it ? eg 1 for immediate requirement (ie wrong polarity)

i got my sylabus booklets, osg and regs,

about 2 workshops looking visual, wrong polarity, no sleeving, low ir meaning, and the coding for faults, (code 1 2 3 4 ) i no how to do all the testing and i know about the what the readings mean and what to look for when doing visual , im not to sure on the write up on how to rectify, only...

hi i have my 303 fault finding exam, tomorrow and i sort of no what faults im going to find. i just need help to write up what i would need to do to remedial the fault. ie : high r1 + r2 reading, low installation resistance reading, and no earth in 1 of the sockets