Well its just after 3 in the afternoon and I still have a sore head.......
Waiting for this evening to come so I can have some hair of the dog. Guiness Drink
Someone I know who wants a CU change done by me has the old 3036 style board and after I looked at it noticed that it only has 3 circuits for the whole house but really only 2 main circuits and 1 for just 1 plug socket.
1 x 30amp socket circuit
1 x 5amp lighting circuit
1 x 16amp circuit...
I have just been to look at a little job for someone and when I got there they showed me what they wanted doing so I had a quick look and told them I would make some inquiries for them.
They have the old type metal incoming fuse box and the door on the front is very nearly falling off and only...
Just had a look at them and they look like the ones I need thanks, I should have been a bit clearer in my original post that I will not have enough cable to get into the new CU as it will probably need moving about 10 - 12 inches away due to space restrictions.
Thanks again for the replies and sorry to be a PITA but would these not be better due to the fact that the enclosure has a 2 screws to gain entry and at least it would give me a bit moer piece of mind due to being more tamper proof and not as easy to disconect the wires from...
Thanks for the quick replies Applaud Smiley
So these would be fine then,
http://cgi.ebay.co.uk/2-LEVER-WAGO-ELECTRIC-CONNECTOR-x-50_W0QQitemZ290315839277QQcmdZViewItemQQptZUK_DIY_Material_Electrical_Fittings_MJ?hash=item43982c272d&_trksid=p3286.c0.m14
Would these be ok to be used when the...
I am just about to change a old 3036 type CU for a new 17th Edition CU but the problem is that in the limited space I have to put the new CU I will have to lengthen some of the wires to reach the new CU and was wondering what are the best connection blocks / terminals to use to do this?