Search results

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    Honeywell Accenta G4 error code ?

    Nothing in the manual. Been advised it means : Zone 3 is (First alarm activated) Zone 2 is (also activated) F doesn't mean fault in this case , it means first
  2. K

    Honeywell Accenta G4 error code ?

    The last couple of nights the alarm has activated and on the LCD RKP it shows the following : 1 2 3 4 5 6 7 8 0 1 F 0 0 0 0 0 What does this mean ? I would have thought it would only show '1' on the zone triggered ? What is the 'F' ? I guess it's a fault code ? All zones are in use. Zone 1...
  3. K

    Honeywell Accenta G4 - Wiring To New Siren

    On initial setup when moving the jumper on the Sounder to activate it it sounds for 5 seconds as per the instructions. http://www.klaxonsignals.com/images/Products/docs/datasheet/112.pdf When I connected the backup battery in the Panel the Sounder again sounds loudly and turns off after I...
  4. K

    Honeywell Accenta G4 - Wiring To New Siren

    Just had a thought, will the Tamper in the Sounder still work being wired this way ? ie. If someone tries to vanalise the unit.
  5. K

    Honeywell Accenta G4 - Wiring To New Siren

    Changed to SCB but didn't make a difference. However, moved the Green wire to the Black and resolved the problem and all Tampers cleared. Thanks very much for your advice. Much appreciated Richard.
  6. K

    Honeywell Accenta G4 - Wiring To New Siren

    Hi all, Need a little help and confirmation of the wiring connections to the Accenta G4 Panel and Sounder. The sounder is a Texecom Flashguard Minn-XW which I have to install internally due to conditions of placing external sounders on the Flat building. I originally had an Odyssey 3E which...
  7. K

    Texecom Premier Elite, Adding Wireless Smart Key

    Yes there is one assigned to the system already. The link for the manual I have been looking at is here ...
  8. K

    Texecom Premier Elite, Adding Wireless Smart Key

    Anybody got any experience in how to 'learn' a new wireless Smart Key to the system. A friend has asked me to help add a new Smart Key. The instruction manual is not that great and makes it look complicated ! Any easy or helpful tips/guides would be appreciated  ; before I start toying ! I've...
  9. K

    Risco Novagard 6 External Sounder - Bright Led's ?

    Paid £36.55 for red live backplate with white front cover plus £5.99 P&P.  Dummy box was £16.56 for front and back plate complete. Got them from Hunters Wholesalers (not sure whether I can mention a firms name ?) Here's a link to their RISCO sounders : ...
  10. K

    Risco Novagard 6 External Sounder - Bright Led's ?

    Decided to take the plunge with the Novagard 6 and fitted it today whilst the sun was out ! Yes super bright LED's which stand out very visibly day and of course much better at night :) Twin piezos too so extremely loud ! Can recommend to anyone whose in the market for a new bell box...
  11. K

    Built In Panic Buttons On Rkp (Accenta G4)

    Thank you Richard the ninth. Much appreciated for the super fast answer.
  12. K

    Built In Panic Buttons On Rkp (Accenta G4)

    Does this need to be programmed in the settings on RKP for it to work ?   It's all connected in the main panel as per the instructions : Sound Comms +13v 0v Tamp x 2 ... but pressing the two 'PA' buttons doesn't have any response. Does it need to wired into the main 'PA' terminals for it...
  13. K

    Risco Novagard 6 External Sounder - Bright Led's ?

    It's times to replace my tired trusty RISCO Novagard 2 which is looking shabby after 15+ years of service. It's a good loud sounder with nice bright LED's which could be seen day or night. It was the original rectangular shape with square ish edges with the straight red lens at the bottom. The...
  14. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    Yes I think I understand what you mean. My setup is exactly the same, I do have a door contact as first point of entry and a PIR in the hallway. So I need to inhibit the hallway PIR. Basically, when the Alarm is set if the hallway PIR is triggered without the door contact being triggered first...
  15. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    BIG thank you to Robert ! Swapped both wires which did the trick and completely fixed both issues of Tamper Lockout and strobe light. Must have been linked. The strobe flashes nicely ! Can't really tell about the flashing LED's so will have look at night. Whilst setting up the system I am not...
  16. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    Thanks guys for the advice for testing for continuity. Yes I think I've got my head around it ! Thank also Robert, I will try swapping the A & B wires and hopefully that will fix it !
  17. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    What's the best method for checking continuity over long runs given the distance between the external siren and the panel.
  18. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    Hello, Not had chance to check the voltage at the bell as it's a little more effort getting the ladders up and the weather hasn't been great. I will, as soon as the opportunity arises. Sorry if its stupid question, I assume I should test this with the Accenta panel powered up. Also, all the...
  19. K

    Honeywell Accenta Mini – Tamper Fault Lockout Problem

    Ok had a quick look today. I linked 'T - A' connections on the Accenta panel for the external siren part of the board. The Tamper Fault Lockout error went away and the LCD displayed  * System Reset * which I understand is the correct display. It appears the problem looks like something with the...
Top