Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Green Renewable Energy Forum
Solar PV Forum
epever hybrid 5kw HI , low voltage disconnect changing parameters
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Ucatchmydrift" data-source="post: 549405" data-attributes="member: 35106"><p>And also like bruspark says above, you may hit that voltage pulling a large load, switch off the load, and the voltage will pop back up.. So, you may want the lvd lower if your hitting it regurly, but have the warning come on incase your at that (genuine) voltage and pulling a small load.. Be handy to know that the warning is happening though, hence why i have data sent into the house/mobile phone etc incase of a problem. You wont hear the inverter bleeping at you with the warning. With lifepo4 you have a larger range to play with lessening the chance of hitting lvd under large loads.. Unless you have a whole bunch of agms to take the large current lessening the voltage drops..</p><p></p><p>(you would have charge from grid come in below 50%soc for example, but you may end up charging from grid when pulling a large load by accident, so you could have it set to charge from grid until it puts in 10% for eg., accept, i think your supposed to fully charge agm/LA to 100% when you charge them else you again can damage the batteries! - another reason to go for lifepo4!)</p></blockquote><p></p>
[QUOTE="Ucatchmydrift, post: 549405, member: 35106"] And also like bruspark says above, you may hit that voltage pulling a large load, switch off the load, and the voltage will pop back up.. So, you may want the lvd lower if your hitting it regurly, but have the warning come on incase your at that (genuine) voltage and pulling a small load.. Be handy to know that the warning is happening though, hence why i have data sent into the house/mobile phone etc incase of a problem. You wont hear the inverter bleeping at you with the warning. With lifepo4 you have a larger range to play with lessening the chance of hitting lvd under large loads.. Unless you have a whole bunch of agms to take the large current lessening the voltage drops.. (you would have charge from grid come in below 50%soc for example, but you may end up charging from grid when pulling a large load by accident, so you could have it set to charge from grid until it puts in 10% for eg., accept, i think your supposed to fully charge agm/LA to 100% when you charge them else you again can damage the batteries! - another reason to go for lifepo4!) [/QUOTE]
Insert quotes…
Verification
Post reply
Green Renewable Energy Forum
Solar PV Forum
epever hybrid 5kw HI , low voltage disconnect changing parameters
Top