Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Main Forums
Electrical Inspection & Testing Forum
Unexpected Reading Between Earth And Neutral
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="not_shocked_yet" data-source="post: 382865" data-attributes="member: 25580"><p>[ATTACH]5596[/ATTACH]</p><p></p><p>Thanks Andy, this is a picture of the switch plate at one end, there are 10 separate cables in here for the 4 switches but I have brioken it down in my previous post to 5 cables for 2 switches and then just the wiring for one switch. </p><p></p><p>If you remember I thought I had fixed the rcd tripping fault because there were 2 loose red conductors when I took the face plate off. I connected them back where I thought thye should go so this picture might not be wired correctly - if you remember I am getting a 0.05Mohm reading from the lighting circuit indicating a short circuit which is probably caused by me putting the disconnected wires back in the wrong place! Of course the short could be somewhere else and the wiring could be right.</p></blockquote><p></p>
[QUOTE="not_shocked_yet, post: 382865, member: 25580"] [ATTACH]5596._xfImport[/ATTACH] Thanks Andy, this is a picture of the switch plate at one end, there are 10 separate cables in here for the 4 switches but I have brioken it down in my previous post to 5 cables for 2 switches and then just the wiring for one switch. If you remember I thought I had fixed the rcd tripping fault because there were 2 loose red conductors when I took the face plate off. I connected them back where I thought thye should go so this picture might not be wired correctly - if you remember I am getting a 0.05Mohm reading from the lighting circuit indicating a short circuit which is probably caused by me putting the disconnected wires back in the wrong place! Of course the short could be somewhere else and the wiring could be right. [/QUOTE]
Insert quotes…
Verification
Post reply
Main Forums
Electrical Inspection & Testing Forum
Unexpected Reading Between Earth And Neutral
Top