Nothing in the manual. Been advised it means :
Zone 3 is (First alarm activated)
Zone 2 is (also activated)
F doesn't mean fault in this case , it means first
The last couple of nights the alarm has activated and on the LCD RKP it shows the following :
1 2 3 4 5 6 7 8
0 1 F 0 0 0 0 0
What does this mean ?
I would have thought it would only show '1' on the zone triggered ? What is the 'F' ? I guess it's a fault code ?
All zones are in use. Zone 1...
On initial setup when moving the jumper on the Sounder to activate it it sounds for 5 seconds as per the instructions.
http://www.klaxonsignals.com/images/Products/docs/datasheet/112.pdf
When I connected the backup battery in the Panel the Sounder again sounds loudly and turns off after I...
Changed to SCB but didn't make a difference. However, moved the Green wire to the Black and resolved the problem and all Tampers cleared.
Thanks very much for your advice. Much appreciated Richard.
Hi all,
Need a little help and confirmation of the wiring connections to the Accenta G4 Panel and Sounder.
The sounder is a Texecom Flashguard Minn-XW which I have to install internally due to conditions of placing external sounders on the Flat building. I originally had an Odyssey 3E which...
Anybody got any experience in how to 'learn' a new wireless Smart Key to the system. A friend has asked me to help add a new Smart Key.
The instruction manual is not that great and makes it look complicated ! Any easy or helpful tips/guides would be appreciated ; before I start toying ! I've...
Paid £36.55 for red live backplate with white front cover plus £5.99 P&P.
Dummy box was £16.56 for front and back plate complete.
Got them from Hunters Wholesalers (not sure whether I can mention a firms name ?)
Here's a link to their RISCO sounders : ...
Decided to take the plunge with the Novagard 6 and fitted it today whilst the sun was out !
Yes super bright LED's which stand out very visibly day and of course much better at night :) Twin piezos too so extremely loud ! Can recommend to anyone whose in the market for a new bell box...
Does this need to be programmed in the settings on RKP for it to work ?
It's all connected in the main panel as per the instructions :
Sound
Comms
+13v
0v
Tamp x 2
... but pressing the two 'PA' buttons doesn't have any response.
Does it need to wired into the main 'PA' terminals for it...
It's times to replace my tired trusty RISCO Novagard 2 which is looking shabby after 15+ years of service. It's a good loud sounder with nice bright LED's which could be seen day or night. It was the original rectangular shape with square ish edges with the straight red lens at the bottom. The...
Yes I think I understand what you mean.
My setup is exactly the same, I do have a door contact as first point of entry and a PIR in the hallway. So I need to inhibit the hallway PIR.
Basically, when the Alarm is set if the hallway PIR is triggered without the door contact being triggered first...