Pwablo

I suspect a European inverter might be far more compliant with EMI legislation. If you use a steel frame for the ground array, that...

How are they able to import and sell the chinese crap if it does not comply with whatever "anti EMF" regs there are?? Does not "CE"...

no one to enforce anything, goes with 'light touch regulation' and 'self certification'.

Hi John You are correct, the CE and UKCA marking should indicate that the manufacturer has complied with the required testing to the...

Hi Since installing the Inline AC and DC filters we found that these only slightly reduced the RFI. The majority of the RFI on these...

I work contests with just 5 watts and manage to work Australia (VK) and New Zealand (ZL) most years, even in low sunspot years. I wonder...

Oh yes! We used to have a Navy radio operator living next door to us as a child. He was also a very keen radio ham, the first to manage...

Aye, one of our neighbours was G3HFD, he had a 600' wire antenna and all homebrew stuff, the valve heaters alone were 4 kW in his shed...

It happens a lot when they brew their own antennas (especially wire ones in built up areas) and use more power than is required. On that...

Hi John This I know all about, unfortunately this fundamental requirement is apparently ignored by everyone even the regulator when it...

Shameful you should have to do all this... john...

Tell me about it John.

Think your correct, I notice that when i rotate my antenna away from the source direction it drops the signal quite a lot, and is not...

nice tidy job. From what I remeber rightly, emf or any form of radio wave has a logorithmic 'power' scale. ie doubling the distance away...

EMI Filters that were Installed are as follows..... 2 x Schaffner FN2200-25-33 1.2Kv DC 25 Amp High Performance Inline EMI Filter on...