Ramon
New member
- Joined
- Feb 11, 2019
- Messages
- 2
- Reaction score
- 0
Hello,
I've been give a couple of Rack PDUs which I want to use on a project. Now this PDU has a 32 Amp plug and I want to change it to 13 Amp. I'm only attaching a couple of domestic lights to this PDU so the Amps used will be way under 1. I would assume that this would therefore be a safe thing to do? Now the wiring for the 32 Amp plug is quite thick (and would not fit into a 13 Amp Plug) - so what would in your expert opinion be the best way forward? I appreciate any help. Thanks!
Here's a link to this PDU if anyone wants to check the specification: https://www.apc.com/shop/mk/en/products/Rack-PDU-Switched-2U-32A-230V-16-C13/P-AP7922
I've been give a couple of Rack PDUs which I want to use on a project. Now this PDU has a 32 Amp plug and I want to change it to 13 Amp. I'm only attaching a couple of domestic lights to this PDU so the Amps used will be way under 1. I would assume that this would therefore be a safe thing to do? Now the wiring for the 32 Amp plug is quite thick (and would not fit into a 13 Amp Plug) - so what would in your expert opinion be the best way forward? I appreciate any help. Thanks!
Here's a link to this PDU if anyone wants to check the specification: https://www.apc.com/shop/mk/en/products/Rack-PDU-Switched-2U-32A-230V-16-C13/P-AP7922