"Electrical Installation Condition Report" to replace the Periodic Inspection Report

[DrVoltage]

Ive just looked through the proposed Ammendment 1 due to be published 1st July 2011 and due to come into effect 1st Jan 2012.

I scanned the document available from the IET.org......

http://www.theiet.org/publishing/wiring-regulations/index.cfm?origin=homepage-wiring-regs

....and noted some of the more important points down in my own BS7671.

The proposed "Electrical Installation Condition Report" that will replace the Periodic Inspection Report will be a welcome addition in my view. More explanatory for the client to understand (not to mention myself!)

I advise all to take a look, its free to view and contains some interesting new material.

 

[ProDave]

Anyone know how to PRINT pages from the DPC?

 

[Mark2spark]

I've also had a quick scan, it appears to me that one can decide to not install an rcd

 

[sparkytim]

De' Ja vue

http://www.talk.electricianforum.co.uk/showthread.php?t=9684&highlight=AMMENDMENT

Keep up boys

 

[Lee321]

De' Ja vuehttp://www.talk.electricianforum.co.uk/showthread.php?t=9684&highlight=AMMENDMENT

Keep up boys

back of the net tim. if only our boys could :coat

 

[illpayyoulater]

Good evening all, I have found this IET website thought I would spread the word...

http://www.theiet.org/publishing/wiring-regulations/DPC/index.cfm

Basically there are new sections, & it all comes into effect Jan 2012; but if you watch the film clips etc there is the free copy of the draft for us to comment on - this is what I thought would be useful as I believe they make some huge changes which are questionable at best...

Paul

 

[Doc Hudson]

Good evening all, I have found this IET website thought I would spread the word...http://www.theiet.org/publishing/wiring-regulations/DPC/index.cfm

Basically there are new sections, & it all comes into effect Jan 2012; but if you watch the film clips etc there is the free copy of the draft for us to comment on - this is what I thought would be useful as I believe they make some huge changes which are questionable at best...

Paul

Welcome to the forum Paul, I have merged this with another thread on the same topic.

Doc H.

 

[illpayyoulater]

Sorry to duplicate someone else's thred.

In my defence I got the email from IET today!!

I'll ****** off then.

 

[a1spark]

Sorry to duplicate someone else's thred. In my defence I got the email from IET today!!

I'll ****** off then.

Thanks for the input I appreciated it !

 

[a1]

Sorry to duplicate someone else's thred. In my defence I got the email from IET today!!

I'll ****** off then.

No you won't!.

You stay put!

 

[DrVoltage]

De' Ja vuehttp://www.talk.electricianforum.co.uk/showthread.php?t=9684&highlight=AMMENDMENT

Keep up boys

Sorry if my post has offended anyone by stepping on toes etc. I was just trying to help. I am new to the forum and still finding my way around. I now realise that I can check other peoples threads for the same info i am about to post.

The new fault code definitions are something that caught my eye too, much more straight forward for the customer i think.

 

[Manator]

Sorry if my post has offended anyone by stepping on toes etc. I was just trying to help. I am new to the forum and still finding my way around. I now realise that I can check other peoples threads for the same info i am about to post.The new fault code definitions are something that caught my eye too, much more straight forward for the customer i think.

No apology required the information you gave is good and its duplication is because you are new and unaware.