Hydraulic crimp tool

[Andy™]

And offer a Vat receipt (thats rare on ebay sales)

ask and 99% of the time you will get one (exlcuding non-business sales)

 

[NozSpark]

They also list this smaller one http://cgi.ebay.co.uk/12-TON-HP70A-HYDRAULIC-CRIMPING-TOOL_W0QQitemZ130474853617QQihZ003QQcategoryZ30928QQssPageNameZWDVWQQrdZ1QQcmdZViewItemAnd offer a Vat receipt (thats rare on ebay sales)

Just bought one of these.... only 1 left now!

 

[Bacon]

Just bought this set as i mainly do 95mm and above.

http://cgi.ebay.co.uk/16-TON-HP240A-HYDRAULIC-CRIMPING-TOOL-/130477402900?pt=LH_DefaultDomain_3&hash=item1e610f2b14

 

[Sidewinder]

Well,

I bought the 10 tonne up to 300mm sq one (I hope) carp on ebay as I needed a cripmer to do some 16, 25 & 35 next month & this was so cheap I had to give it a try!

Now waiting for it to turn up.

May try to do a review!

 

[Larnacaman]

Do they do 16, 25, 35mm Wagos now then?? lol!!!

Hahaha, ....just pulling your leg mate!! ...lol!!

 

[Andy™]

Do they do 16, 25, 35mm Wagos now then?? lol!!! Hahaha, ....just pulling your leg mate!! ...lol!!

i wouldnt be surprised if they have plans for it!

just imagine splitting tails.... wago henley block!

 

[Sidewinder]

Larnacaman,

Ha Ha!

Cant use Wago's for ring lugs to connect to a motor now can I!

I also have to put the wires into a control, volt drop & all that the sizes are larger than the contactors so reducing pins are in order, thus the big crimper!

 

[NozSpark]

Got mine yesterday.... will give it a go tomorrow!

---------- AUTO MERGE Post added at 22:17 ---------- Previous post was at 22:16 ----------

Will give it a go with some 10mm rings...

(does that sound rude??)

 

[m4tty]

Looking forward to the reviews on this thread guys. Nice one

 

[NozSpark]

I did a couple of 10 / 6 mm ring crimps today reasonably easy to do by self, although it was made easier by the fact that I did them on the floor. Gave them a quick tug and they held firm no problem.

 

[Andy™]

Looking forward to the reviews on this thread guys. Nice one

not much to review...

stick cable in, crimp, remove cable...

and they end up something like this

 

[Bacon]

Looks ok to me that does are the dies good quality.

 

[Andy™]

seem to be. used the 70 a few times, and mostly 35/50. no problems so far

also crimped the odd other item to see how well it squashes stuff...

 

[Bacon]

Used the 35 dies today but no good had to put a 25 die in for 35 mm cable may see if the 25 does a 25mm cable tomoz.

 

[roys]

I had the same problem with the 10mm not giving a suffient crimp, I was able to pull the cable out of the crimp. Also used the 25mm it was fine.